Registrations are our permissions tool for low-risk activities.
The legal description of registration activities is in Schedule 1 of the Environment Protection Regulations (the Regulations).
Sites reprocessing specified electronic waste must hold an A02c registration. This is at a design capacity of less than or equal to 500 tonnes per year.
Specified electronic waste includes:
- rechargeable batteries
- cathode ray tube monitors and televisions
- flat panel monitors and televisions
- information technology and telecommunications equipment
- lighting and photovoltaic panels.
-
Note: Where a condition includes the words ‘placeholder’, values will be populated with information that is specific to your site.
Where a condition includes a reference to a ‘Figure’ or ‘Appendix’ information will be populated that’s specific to your site.
Condition code |
Description |
REG_G01
|
A copy of this registration must be kept at the activity site and be easily accessible to persons who are engaging in an activity conducted at the activity site. Information regarding the requirements of the registration and the Act duties must be included in site induction and training information. |
REG_G02
|
You must immediately notify the Authority by calling 1300 EPA VIC (1300 372 842) in the event of a discharge, emission or deposit which gives rise to, or may give rise to, actual or potential harm to human health or the environment. |
REG_G03
|
You must:
a) notify the Authority of any change to your name or address (including your registered address or activity site address as applicable); and
b) update the EPA Interaction Portal if any other administrative details relevant to this registration change.
|
REG_WM02 |
All plant and equipment must be maintained and operated in proper working condition, in accordance with the manufacturer’s specifications. |
REG_WM03
|
You must ensure that:
a) only waste of a type shown in Appendix 1 of this registration is accepted at the activity site; and
b) if any waste is received at the activity site that is not of a type shown in Appendix 1, that this waste is placed in a designated and clearly sign-posted temporary storage area and is transported to a site which is authorised to receive this waste as soon as practicable.
|
REG_WM04
|
You must store and manage waste in a manner which minimises the risk of fires.
For more information, see EPA guideline Management and storage of combustible recyclable and waste materials (publication 1667.2)
|
Sites processing organic waste by aerobic or anaerobic biological conversion must hold an A07b registration. This requirement for registration depends on:
- the amount of organic waste received
- the amount of pasteurised material, compost or digestate produced
- if operations are processing organic waste generated on-site and if the processed organic waste stays on-site
- the amount of organic waste stored on the site at any time.
-
Note: Where a condition includes the words ‘placeholder’, values will be populated with information that is specific to your site.
Where a condition includes a reference to a ‘Figure’ or ‘Appendix’ information will be populated that’s specific to your site.
Condition code |
Description |
REG_G01
|
A copy of this registration must be kept at the activity site and be easily accessible to persons who are engaging in an activity conducted at the activity site. Information regarding the requirements of the registration and the Act duties must be included in site induction and training information. |
REG_G02
|
You must immediately notify the Authority by calling 1300 EPA VIC (1300 372 842) in the event of a discharge, emission or deposit which gives rise to, or may give rise to, actual or potential harm to human health or the environment. |
REG_G03
|
You must:
a) notify the Authority of any change to your name or address (including your registered address or activity site address as applicable); and
b) update the EPA Interaction Portal if any other administrative details relevant to this registration change.
|
REG_WM03
|
You must ensure that:
a) only waste of a type shown in Appendix 1 of this registration is accepted at the activity site; and
b) if any waste is received at the activity site that is not of a type shown in Appendix 1, that this waste is placed in a designated and clearly sign-posted temporary storage area and is transported to a site which is authorised to receive this waste as soon as practicable.
|
REG_WM04
|
You must store and manage waste in a manner which minimises the risk of fires.
For more information, see EPA guideline Management and storage of combustible recyclable and waste materials (publication 1667.2)
|
Sites storing less than, or equal to, 40 tonnes or 5000 equivalent passenger units of waste tyres on-site must hold an A09b registration.
This doesn’t include sites that store less than 5 m3 of waste tyres at any time. Or, if you use the waste tyres according to specifications acceptable to the Authority. These are in a determination made under regulation 5 of the Environment Protection Regulations 2021.
-
Note: Where a condition includes the words ‘placeholder’, values will be populated with information that is specific to your site.
Where a condition includes a reference to a ‘Figure’ or ‘Appendix’ information will be populated that’s specific to your site.
Condition code |
Description |
REG_G01
|
A copy of this registration must be kept at the activity site and be easily accessible to persons who are engaging in an activity conducted at the activity site. Information regarding the requirements of the registration and the Act duties must be included in site induction and training information. |
REG_G02
|
You must immediately notify the Authority by calling 1300 EPA VIC (1300 372 842) in the event of a discharge, emission or deposit which gives rise to, or may give rise to, actual or potential harm to human health or the environment. |
REG_G03
|
You must:
a) notify the Authority of any change to your name or address (including your registered address or activity site address as applicable); and
b) update the EPA Interaction Portal if any other administrative details relevant to this registration change.
|
REG_WM01
|
For all wastes of a type listed in Appendix 1, you must keep records detailing:
a) incoming and outgoing movements of waste;
b) the current location of waste at your activity site; and
c) the waste type of any waste located at your activity site.
These records must be retained for five years and be made available to the Authority on request.
|
REG_WM03
|
You must ensure that:
a) only waste of a type shown in Appendix 1 of this registration is accepted at the activity site; and
b) if any waste is received at the activity site that is not of a type shown in Appendix 1, that this waste is placed in a designated and clearly sign-posted temporary storage area and is transported to a site which is authorised to receive this waste as soon as practicable.
|
REG_WM04
|
You must store and manage waste in a manner which minimises the risk of fires.
For more information, see EPA guideline Management and storage of combustible recyclable and waste materials (publication 1667.2)
|
Vehicles transporting reportable priority waste (transport) must hold an A10b registration. This is excluding waste classified with the following waste codes:
- B100 – acids in a solid form or acidic solutions with pH value 4 or less
- E100 – oxidising agents (including peroxides)
- G100 – ethers and highly flammable hydrocarbons, including petrol and jet fuel
- R100 – clinical and related wastes, including biomedical waste, not otherwise specified in Schedule 5 - Waste classification, Environment Protection Regulations 2021.
-
Note: Where a condition includes the words ‘placeholder’, values will be populated with information that is specific to your site.
Where a condition includes a reference to a ‘Figure’ or ‘Appendix’ information will be populated that’s specific to your site.
Condition code |
Description |
REG_G01.01
|
A copy of this registration must be kept in the vehicle to which the registration applies and be easily accessible to persons who are engaging in the registration activity.
|
REG_G02
|
You must immediately notify the Authority by calling 1300 EPA VIC (1300 372 842) in the event of a discharge, emission or deposit which gives rise to, or may give rise to, actual or potential harm to human health or the environment. |
REG_G03.01
|
You must:
a) notify the Authority of any change to your name or registered address; and
b) update the EPA Interaction Portal if any other administrative details relevant to this registration change.
|
REG_WT01
|
No reportable priority wastes other than those listed in Appendix 2 may be transported by the vehicle listed in Appendix 1.
|
REG_WT02
|
The holder of this registration must ensure that reportable priority waste (transport) is stored in a way which minimises the risk of waste escaping, spilling or leaking at any time during transport.
|
REG_WT03
|
The holder of this registration must ensure that reportable priority waste (transport) of different types is not transported together unless the wastes are of a type or types that are compatible with each other.
|
REG_WT04
|
The holder of this registration must ensure that containers used to contain reportable priority waste (transport) during transport are compatible with the reportable priority waste (transport).
|
REG_WT05
|
The holder of this registration must ensure that when a vehicle to which the registration applies is used to transport reportable priority waste, the driver has completed all EPA approved training requirements and all training certifications are current and valid.
|
REG_WT06
|
The holder of this registration must ensure that when a vehicle to which the registration applies is used to transport waste classified as a class of dangerous goods as per Appendix A of the Waste Classification Assessment protocol (publication 1827), the driver has completed all EPA approved training requirements and all training certifications are current and valid.
|
REG_WT07
|
Subject to condition REG_WT08, a vehicle transporting the following industrial wastes in a tipper, tanker or container with a capacity of more than 500 kilograms or litres must display the 30XY Emergency Information Panel depicted in Figure 1—
a) D300
b) J100
c) J120
d) J130
e) J170
f) K100
g) K110
h) L100
i) L200-NH
j) T130 - H
|
REG_WT08
|
Where emergency information panels must be fixed to a vehicle, if the mounting of full-size panels is not possible due to vehicle design or construction, half-size panels are permitted to be fixed. Half-size panels must replicate the information and proportions and measure not less than half the dimensions of the full-size emergency information panel otherwise required.
|
REG_WT09 |
A vehicle transporting clinical and pharmaceutical wastes must have the class label depicted in Figure 2 in black on a white background fixed on the front and rear of the vehicle. |
REG_WT10
|
When clinical and pharmaceutical wastes are being transported, the waste(s) must be:
a) packaged in a manner which minimises the risk to handlers and the community; and
b) clearly labelled to identify the type of waste or wastes being transported.
For more information, see EPA guidance Clinical and related waste – operational guidance (publication IWRG612)
|
REG_WT11
|
All clinical and pharmaceutical wastes must be transported in a sealed load compartment that is lockable or in a lockable secondary container. |
REG_WT12 |
You must ensure that, where you have made a declaration to the Authority that the vehicle to which the registration applies is fit for the purpose of transporting the reportable priority waste (transport), the vehicle and associated insurance and approvals are maintained in accordance with that declaration whenever the vehicle is transporting reportable priority waste (transport).
|
REG_WT13
|
The holder of this registration may unload the reportable priority waste (transport) onto another means of transport that will convey the waste interstate or overseas, provided that the Authority has approved the interstate or overseas destination.
|
REG_WT14
|
The holder of this registration must ensure there is an impact buffer distance between the rear of vehicle and liquid waste containers to prevent any spills if the rear of the vehicle is impacted.
|
REG_WT15 |
The load compartment must be separated from the driver’s cabin by a solid partition.
Note: This condition does not apply to vehicles classified as prime movers.
|
REG_WT16
|
A spill kit that is appropriate for the type and volume of waste being transported must be:
a) carried in the vehicle; and
b) accessible at all times.
Note: This condition does not apply to vehicles classified as prime movers.
|
REG_WT17
|
All (solid) bulk loads must be fully contained and/or covered by a suitable tarpaulin cover that prevents reportable priority waste (transport), including dust, from leaving the vehicle.
Note: This condition does not apply to vehicles classified as prime movers.
|
REG_WT18 |
The holder of this registration must ensure that the waste load compartment, which is to be used for transporting packaged liquid waste, is designed and maintained to ensure that it contains all spills effectively.
Note: This condition does not apply to vehicles classified as a tanker, prime mover, tipper, trailer without secondary containment, hooklift (bin/skip only), truck without secondary containment, utility without secondary containment and van without secondary containment.
|
REG_WT19
|
When asbestos waste is being transported, all asbestos waste must be appropriately packaged in a manner which prevents the release of airborne asbestos fibres.
All asbestos waste must be securely loaded and stowed on the vehicle during transit in such a way that does not cause any of the packaging to rupture.
Note: This condition does not apply to vehicles classified as prime movers or tankers.
For more information, see EPA guidance Asbestos transport and disposal (publication IWRG611.2)
|
Sites receiving, storing or processing waste generated at another site must hold an A13c registration. This is when it’s for the purposes of resource recovery or off-site transfer or disposal. Also, if there’s between 5 m3 and 5000 m3 of stored waste on the site at any time.
-
Note: Where a condition includes the words ‘placeholder’, values will be populated with information that is specific to your site.
Where a condition includes a reference to a ‘Figure’ or ‘Appendix’ information will be populated that’s specific to your site.
Condition code |
Description |
REG_G01
|
A copy of this registration must be kept at the activity site and be easily accessible to persons who are engaging in an activity conducted at the activity site. Information regarding the requirements of the registration and the Act duties must be included in site induction and training information. |
REG_G02
|
You must immediately notify the Authority by calling 1300 EPA VIC (1300 372 842) in the event of a discharge, emission or deposit which gives rise to, or may give rise to, actual or potential harm to human health or the environment. |
REG_G03
|
You must:
a) notify the Authority of any change to your name or address (including your registered address or activity site address as applicable); and
b) update the EPA Interaction Portal if any other administrative details relevant to this registration change.
|
REG_WR01
|
You must immediately notify the Authority by calling 1300 EPA VIC (1300 372 842), if the volume of waste stored on the activity site exceeds 4500m3 at any time. |
REG_WM01
|
For all wastes of a type listed in Appendix 1, you must keep records detailing:
a) incoming and outgoing movements of waste;
b) the current location of waste at your activity site; and
c) the waste type of any waste located at your activity site.
These records must be retained for five years and be made available to the Authority on request.
|
REG_WM02
|
All plant and equipment must be maintained and operated in proper working condition, in accordance with the manufacturer’s specifications.
|
REG_WM03.01
|
You must ensure that:
a) only waste of a type shown in Appendix 1 of this registration is accepted at the activity site, except where waste is received in accordance with a permission, determination or designation issued by the Authority under the Environment Protection Act 2017 or regulations made pursuant to that Act; and
b) if any waste is received at the activity site that is not in accordance with a) (above), that this waste is placed in a designated and clearly sign-posted temporary storage area and is transported to a site which is authorised to receive this waste within 21 days of the date it was received.
|
REG_WM04
|
You must store and manage waste in a manner which minimises the risk of fires.
For more information, see EPA guideline Management and storage of combustible recyclable and waste materials (publication 1667.2)
|
Sites storing 40 m3 or less of any biomedical waste must hold an A21 registration. This is when it’s not generated at the site by a council, a health or ambulance service.
-
Note: Where a condition includes the words ‘placeholder’, values will be populated with information that is specific to your site.
Where a condition includes a reference to a ‘Figure’ or ‘Appendix’ information will be populated that’s specific to your site.
Condition code |
Description |
REG_G01
|
A copy of this registration must be kept at the activity site and be easily accessible to persons who are engaging in an activity conducted at the activity site. Information regarding the requirements of the registration and the Act duties must be included in site induction and training information. |
REG_G02
|
You must immediately notify the Authority by calling 1300 EPA VIC (1300 372 842) in the event of a discharge, emission or deposit which gives rise to, or may give rise to, actual or potential harm to human health or the environment. |
REG_G03
|
You must:
a) notify the Authority of any change to your name or address (including your registered address or activity site address as applicable); and
b) update the EPA Interaction Portal if any other administrative details relevant to this registration change.
|
REG_BW01
|
Containers used to store biomedical waste must be sufficiently sealed and clearly labelled so that the contents can be identified.
|
REG_WM03
|
You must ensure that:
a) only waste of a type shown in Appendix 1 of this registration is accepted at the activity site; and
b) if any waste is received at the activity site that is not of a type shown in Appendix 1, that this waste is placed in a designated and clearly sign-posted temporary storage area and is transported to a site which is authorised to receive this waste as soon as practicable.
|
Sites temporarily storing less than 10 m3 of double-wrapped, non-friable asbestos, not generated on-site, must hold an A22 registration. This is if the storage is for a period of no more than 60 days.
The site must be:
- permitted for use as a transfer station under a planning scheme and allowed to accept asbestos, or
- used as a depot by a:
- electricity distribution company
- gas distribution company
- water corporation
- telecommunications carrier (a public utility)
- contractor of a public utility, that stores only asbestos generated by the public utility
- contractor of the public utility that’s 100 metres or more from sensitive land uses. This includes residential premises, health services, child care centres and education centres.
-
Note: Where a condition includes the words ‘placeholder’, values will be populated with information that is specific to your site.
Where a condition includes a reference to a ‘Figure’ or ‘Appendix’ information will be populated that’s specific to your site.
Condition code |
Description |
REG_G01
|
A copy of this registration must be kept at the activity site and be easily accessible to persons who are engaging in an activity conducted at the activity site. Information regarding the requirements of the registration and the Act duties must be included in site induction and training information. |
REG_G02
|
You must immediately notify the Authority by calling 1300 EPA VIC (1300 372 842) in the event of a discharge, emission or deposit which gives rise to, or may give rise to, actual or potential harm to human health or the environment. |
REG_G03
|
You must:
a) notify the Authority of any change to your name or address (including your registered address or activity site address as applicable); and
b) update the EPA Interaction Portal if any other administrative details relevant to this registration change.
|
REG_WM03
|
You must ensure that:
a) only waste of a type shown in Appendix 1 of this registration is accepted at the activity site; and
b) if any waste is received at the activity site that is not of a type shown in Appendix 1, that this waste is placed in a designated and clearly sign-posted temporary storage area and is transported to a site which is authorised to receive this waste as soon as practicable.
|
REG_AS01
|
You must store asbestos wastes in a manner which prevents the release of airborne asbestos fibres, including wrapping the waste in a material of suitable type and thickness and securely sealing all openings.
|
REG_AS02
|
You must clearly label all asbestos waste.
|
Sites temporarily storing 1000 litres or less of designated waste, not generated at the site, must hold an A23 registration. This is if the storage is for a period of no more than 60 days.
-
Note: Where a condition includes the words ‘placeholder’, values will be populated with information that is specific to your site.
Where a condition includes a reference to a ‘Figure’ or ‘Appendix’ information will be populated that’s specific to your site.
Condition code |
Description |
REG_G01
|
A copy of this registration must be kept at the activity site and be easily accessible to persons who are engaging in an activity conducted at the activity site. Information regarding the requirements of the registration and the Act duties must be included in site induction and training information. |
REG_G02
|
You must immediately notify the Authority by calling 1300 EPA VIC (1300 372 842) in the event of a discharge, emission or deposit which gives rise to, or may give rise to, actual or potential harm to human health or the environment. |
REG_G03
|
You must:
a) notify the Authority of any change to your name or address (including your registered address or activity site address as applicable); and
b) update the EPA Interaction Portal if any other administrative details relevant to this registration change.
|
REG_DW01
|
You must store all designated wastes in a manner which prevent leaks or spills from escaping into the environment.
|
REG_DW02
|
A maintained spill kit (or kits) must be kept on the activity site and located near the waste storage area.
|
REG_DW03
|
Containers used to store designated waste must be sufficiently sealed and clearly labelled so that the contents can be identified.
|
REG_WM01
|
For all wastes of a type listed in Appendix 1, you must keep records detailing:
a) incoming and outgoing movements of waste;
b) the current location of waste at your activity site; and
c) the waste type of any waste located at your activity site.
These records must be retained for five years and be made available to the Authority on request.
|
REG_WM03
|
You must ensure that:
a) only waste of a type shown in Appendix 1 of this registration is accepted at the activity site; and
b) if any waste is received at the activity site that is not of a type shown in Appendix 1, that this waste is placed in a designated and clearly sign-posted temporary storage area and is transported to a site which is authorised to receive this waste as soon as practicable.
|
Sites using and/or storing more than 5m3 of waste tyres for the purpose of producing silage must hold a B04 registration.
For guidance see Safe storage and use of waste tyres for silage production B04 guidance on waste tyres for silage production.
-
Note: Where a condition includes the words ‘placeholder’, values will be populated with information that is specific to your site.
Where a condition includes a reference to a ‘Figure’ or ‘Appendix’ information will be populated that’s specific to your site.
Condition code |
Description |
REG_G01
|
A copy of this registration must be kept at the activity site and be easily accessible to persons who are engaging in an activity conducted at the activity site. Information regarding the requirements of the registration and the Act duties must be included in site induction and training information. |
REG_G02
|
You must immediately notify the Authority by calling 1300 372 842 in the event of a discharge, emission or deposit which gives rise to, or may give rise to, actual or potential harm to human health or the environment. |
REG_G03
|
You must:
- notify the Authority of any change to your name or address (including your registered address or activity site address as applicable); and
- update the EPA Interaction Portal if any other administrative details relevant to this registration change.
|
REG_WM01
|
For all wastes of a type listed in Appendix 1, you must keep records detailing:
- incoming and outgoing movements of waste;
- the current location of waste at your activity site; and
- the waste type of any waste located at your activity site.
These records must be retained for five years and be made available to the Authority on request.
|
REG_WM03
|
You must ensure that:
a) only waste of a type shown in Appendix 1 of this registration is accepted at the activity site; and
b) if any waste is received at the activity site that is not of a type shown in Appendix 1, that this waste is placed in a designated and clearly sign-posted temporary storage area and is transported to a site which is authorised to receive this waste as soon as practicable.
|
REG_WM05
|
You must store and manage stored waste tyres in a manner which minimises the risk of fires.
For more information, see EPA webpage guidance How to Store and Transport Waste Tyres as amended from time to time.
|
Sites reprocessing glass waste at a design capacity of less than or equal to 10,000 tonnes per year must hold an H05c registration.
-
Note: Where a condition includes the words ‘placeholder’, values will be populated with information that is specific to your site.
Where a condition includes a reference to a ‘Figure’ or ‘Appendix’ information will be populated that’s specific to your site.
Condition code |
Description |
REG_G01
|
A copy of this registration must be kept at the activity site and be easily accessible to persons who are engaging in an activity conducted at the activity site. Information regarding the requirements of the registration and the Act duties must be included in site induction and training information. |
REG_G02
|
You must immediately notify the Authority by calling 1300 EPA VIC (1300 372 842) in the event of a discharge, emission or deposit which gives rise to, or may give rise to, actual or potential harm to human health or the environment. |
REG_G03
|
You must:
- notify the Authority of any change to your name or address (including your registered address or activity site address as applicable); and
- update the EPA Interaction Portal if any other administrative details relevant to this registration change.
|
REG_WM02
|
All plant and equipment must be maintained and operated in proper working condition, in accordance with the manufacturer’s specifications.
|
REG_WM03
|
You must ensure that:
a) only waste of a type shown in Appendix 1 of this registration is accepted at the activity site; and
b) if any waste is received at the activity site that is not of a type shown in Appendix 1, that this waste is placed in a designated and clearly sign-posted temporary storage area and is transported to a site which is authorised to receive this waste as soon as practicable.
|
REG_WM04
|
You must store and manage waste in a manner which minimises the risk of fires.
For more information, see EPA guideline Management and storage of combustible recyclable and waste materials (publication 1667.2)
|
Sites operating commercial dry cleaning activities must hold an L07 registration. Commercial dry cleaning activities meaning the cleaning of garments using a chemical solvent other than water for commercial purposes.
-
Note: Where a condition includes the words ‘placeholder’, values will be populated with information that is specific to your site.
Where a condition includes a reference to a ‘Figure’ or ‘Appendix’ information will be populated that’s specific to your site.
Condition code |
Description |
REG_G01
|
A copy of this registration must be kept at the activity site and be easily accessible to persons who are engaging in an activity conducted at the activity site. Information regarding the requirements of the registration and the Act duties must be included in site induction and training information. |
REG_G02
|
You must immediately notify the Authority by calling 1300 EPA VIC (1300 372 842) in the event of a discharge, emission or deposit which gives rise to, or may give rise to, actual or potential harm to human health or the environment. |
REG_G03
|
You must:
a) notify the Authority of any change to your name or address (including your registered address or activity site address as applicable); and
b) update the EPA Interaction Portal if any other administrative details relevant to this registration change.
|
REG_DC01
|
You must maintain records of machine maintenance which is undertaken. These records must be retained for five years and be made available to the Authority on request.
For more information, see page 18 of the Best practice manual for drycleaners: Managing drycleaning waste on the Drycleaning Institute of Australia website.
|
REG_DC02
|
You must ensure that all persons engaging in the prescribed activity are properly trained and are familiar with how to manage dry-cleaning chemicals and wastes, and the legal requirements of the registration and the Act.
|
REG_DC03
|
Containers used to store dry-cleaning chemicals and wastes must be clearly labelled so that the contents can be identified.
|
REG_DC04
|
You must store dry-cleaning chemicals and wastes:
a) in sufficiently sealed, chemically-resistant containers;
b) separately from other chemicals;
c) under cover;
d) away from drains and sewers; and
e) away from extreme heat.
|
REG_DC05
|
You must store all dry-cleaning chemicals and wastes (including separator water) in a manner which prevent leaks or spills from escaping into the environment.
For more information see:
|
REG_DC06
|
You must ensure measures are in place to contain and clean-up leaks or spills of dry-cleaning chemicals and wastes.
|
REG_DC07
|
You must not dispose of hazardous dry-cleaning wastes:
a) to general waste (e.g. a rubbish bin);
b) to the sewer (e.g. sink or toilet);
c) to stormwater (e.g. via stormwater drains); or
d) to a place or premises (including a vehicle) which is not lawfully authorised to receive the waste.
|
REG_DC08
|
You must keep records of:
a) outgoing movements of dry-cleaning wastes;
b) the current location of dry-cleaning wastes at your activity site; and
c) the waste type of any dry-cleaning wastes located at your activity site.
These records must be retained for five years and be made available to the Authority on request.
For more information, see page 18 of the Best practice manual for drycleaners: Managing drycleaning waste on the Drycleaning Institute of Australia website.
|
REG_WM02
|
All plant and equipment must be maintained and operated in proper working condition, in accordance with the manufacturer’s specifications.
|
Sites receiving Actual Acid Sulfate Soil or Potential Acid Sulfate Soil for treatment or amelioration must hold an L08 registration. This doesn’t include soil that has contaminant concentrations exceeding the upper limits for fill material containment concentrations. This is following the Waste Disposal Categories - Characteristics and Thresholds guidelines. Or, if the soil contains asbestos.
-
Note: Where a condition includes the words ‘placeholder’, values will be populated with information that is specific to your site.
Where a condition includes a reference to a ‘Figure’ or ‘Appendix’ information will be populated that’s specific to your site.
Condition code |
Description |
REG_G01
|
A copy of this registration must be kept at the activity site and be easily accessible to persons who are engaging in an activity conducted at the activity site. Information regarding the requirements of the registration and the Act duties must be included in site induction and training information. |
REG_G02
|
You must immediately notify the Authority by calling 1300 EPA VIC (1300 372 842) in the event of a discharge, emission or deposit which gives rise to, or may give rise to, actual or potential harm to human health or the environment. |
REG_G03
|
You must:
a) notify the Authority of any change to your name or address (including your registered address or activity site address as applicable); and
b) update the EPA Interaction Portal if any other administrative details relevant to this registration change.
|
REG_WAS01
|
You must ensure that any waste acid sulfate soil at the activity site is:
a) treated in a manner which neutralises existing and potential acidity; and
b) is managed and contained in a manner which minimises the risk of acidic leachate infiltration to land and run-off to surface waters.
|
REG_WAS02
|
You must test and verify the net acidity of the accepted and treated waste acid sulfate soil using the Acid Base Accounting approach and laboratory methods detailed in the National Acid Sulfate Soils Guidance – National acid sulfate soils identification and laboratory methods manual, published by Water Quality Australia in June 2018 (as in force from time to time).
|
REG_WAS03
|
You must keep records for the activity site detailing:
a) the date and time of receipt of waste acid sulfate soil;
b) the amount of waste acid sulfate soil received;
c) soil pH of the waste acid sulfate soil on receipt;
d) the results of treatment and verification testing in accordance with condition REG_WAS02;
e) the subsequent use, movement, deposit or disposal of waste acid sulfate soil post-treatment; and
f) any investigative or other report or information provided by the waste generator that relates to the waste acid sulfate soil received.
These records must be retained for five years and be made available to the Authority on request.
|
REG_WAS04
|
You must ensure that verification and treatment of waste acid sulfate soil (WASS) is undertaken by an appropriately qualified and experienced practitioner who has:
(a) tertiary qualifications in environmental science, environmental management or equivalent and experience in soil management of WASS; or
(b) five or more years practical experience in WASS investigation, treatment and management.
|
REG_WAS05
|
You must ensure that any laboratory analysis required in relation to the activities authorised by this registration is undertaken by a National Associated of Testing Authorities accredited laboratory.
|
REG_WM03
|
You must ensure that:
a) only waste of a type shown in Appendix 1 of this registration is accepted at the activity site; and
b) if any waste is received at the activity site that is not of a type shown in Appendix 1, that this waste is placed in a designated and clearly sign-posted temporary storage area and is transported to a site which is authorised to receive this waste as soon as practicable.
|
The legal description of registration activities is in Schedule 1 of the
Environment Protection Regulations (the Regulations).